In your package: 1x Range Extender 12.6V13A WP, 1x connecting cable set (with extra fuses + tongue connectors).
IP Rating: IP65 waterproof.Description
Compatible with: (outboard) engines with 12V alternator with at least 15A charge current. Works with both lead-acid and LiFePO4 starter batteries (minimum capacity of LiFePO4 battery is 50A). Compatible with all known outboard brands (e.g. Honda, Mercury, Yamaha, Suzuki etc.).
Optimal charging profile: provides the correct charging profile (charge voltage and current) to safely charge your Rebelcell 12V AV battery.
Starter battery discharge protection: The Range Extender monitors the voltage in the starter battery and will only start charging if voltage starter battery is above 13.2V and stops if voltage drops below 12.8V.
Overcharge protection: will automatically adjust the alternator output charge current to avoid overcharging of your battery.
Temperature protection: the ‘dynamic thermal output control’ limits the charge current to reduce the temperature.
Short circuit protection: automatic shutdown with short circuit.
Charge indicator: LED indicator shows charge status.
Warranty: two years.
PRODUCT DESCRIPTION REBELCELL RANGE EXTENDER 12.6V13A WATERPROOF
Please note: for optimal functionality, ensure that the alternator of your outboard engine delivers a minimum output of 15A, as the Range Extender will not operate otherwise. This Range Extender (12.6V13A) is only suitable for use with Rebelcell 12V AV batteries (12V70 AV and up!). Check our webshop for applicable models for 24V and 36V Range Extenders.
PLEASE REVIEW THE BELOW INFORMATION BEFORE COMPLETING YOUR ORDER
- The Range Extender is only suitable for use with (outboard) engines that meet the minimum alternator output requirements as indicated before. It is NOT suitable for use with (outboard) engines that use a charging coil instead of an alternator: the capacity is not sufficient to charge both the starter battery and Rebelcell battery. Consult the manual of your (outboard) engine for this information. Lower than specified charge current from the alternator will lead to de-activation of the Range Extender to avoid discharge of the starter battery.
- The Range Extender works with both lead-acid and LiFePO4 starter batteries (attention: minimum requirements for LiFePO4 battery capacity is 50A).
- Mount the Range Extender in accordance with the installation guidelines (in user manual) in a dry and cool place with sufficient space around for ventilation and cooling. Never mount it on the bottom of your boat or in a location that does not remain dry.
- Only use the Range Extender with the suitable Rebelcell 12V AV battery (12V70 AV batteries and up)! Using it with a different battery can lead to irreversible damage to your equipment and battery. This damage is explicitly excluded from warranty.
- Additional connectors (not included) for the input cable are required to connect the Range Extender to the starter battery. For specifications please see the Installation guidelines in the user manual and consult a certified electrician if you have any questions about installation.
Technical Specifications
| Attribute | Details |
|---|---|
| Capacity | 160W |
| Galvanic Separation | No |
| Input Voltage Range (Alternator Output) | 9 – 18V |
| Output Voltage | 12.6V |
| Output Charge Current | Max 13A |
| Input/Output Isolated | No |
| Output Ripple & Noise | <100mV RMS |
| Peak Efficiency | 93% |
| Parallel Connection | No |
| Temperature Range | -20°C to +80°C |
| Dimensions | 150 x 130 x 50 (mm) |
| Weight | 1.45 kg |
| LED Charge Indicator | RED flashing: low starter battery voltage, RED solid: charging, GREEN: charging complete |
| Connectors (Input/Output) | M4 |
Protection
| Attribute | Details |
|---|---|
| Overcharge/Short Circuit | Yes, output only |
| Over Voltage | Yes, output only |
| Reverse Polarity Protection | No |
| High Temperature Protection | Yes |
| Starter Battery Discharge Protection | Yes, starts charging if voltage starter battery > 13.2V, stops if voltage < 12.8V |
| Input Fuse | 25A (external) |
| Output Fuse | 25A (external) |
Certification and Warranty
| Attribute | Details |
|---|---|
| Security Class (IEC 529) | IP65 |
| Certification | CE, UKCA, RoHS (EU 2015/863 and EU 2017/2102) |
| EU-EMC Standard | EN55032:2015/A11:2020, EN55035:2017/A11:2020, EN61000-3-2:2019/A1:2021, EN61000-3-3:2013/A2:2021 |
| UKCA-EMC Standard | BS EN55032:2015/A11:2020, BS EN55035:2017/A11:2020, BS EN61000-3-2:2019/A1:2021, BS EN61000-3-3:2013/A2:2021 |
| Warranty | Two years |
| Barcode | 7106623697528 |
| EAN | 872096430939 |
| Product Code | DC12V13REWP |
| HS Code (International / EU) | 850440 / 85044060 |
Reviews
There are no reviews yet.