Application: depth sounders, LED lighting, camera equipment, GPS navigation equipment
Built-in abuse protection: switches off automatically in case of short circuit, high temperature, high voltage and deep discharge. With integrated 10A fuse in + output wire to protect your equipment.
Included: 12V DC Stabiliser 3A, 1x Anen PA-45 connectorDescription
Easy connection M8 connector for easy connection to the battery. 1 click connection via ANEN PA-45 connector to your 12V equipment.
Waterproof filled up with epoxy resin, IP65 waterproof, can be used outdoors in wet surroundings, like a fishing boat or kayak.
Built-in abuse protection: switches off automatically in case of short circuit, high temperature, high voltage and deep discharge. With integrated 3A fuse in + output wire to protect your equipment.
Warranty: 2 years.
PLEASE REVIEW THE BELOW INFORMATION BEFORE COMPLETING YOUR ORDER
- Only use with Rebelcell 12V batteries with a working voltage between 9.0V and 18.0V. Use with unsuitable batteries can damage the converter. Never use if the voltage of your battery is below 9.0V. The undervoltage will cause the converter to heat up rapidly and will lead to irreversible damage to your converter.
- Pay attention to the polarity when connecting to your battery (+ wire to the + of the battery and – wire to the – of the battery). Reversing polarity may damage your converter and your equipment.
- Only connect to 12V equipment with a power consumption of less than 3A. If you connect equipment that draws more power you will damage the converter!.
- Never install or place the 12V DC Stabiliser on the battery. The 12V DC Stabiliser can become very hot and damage your battery. Fix the 12V DC Stabiliser on a metal (aluminum) plate with screws for safe use and additional heat dissipation.
Technical specifications
Type |
Non-isolated DC-DC converter |
Voltage In |
9V-18V |
Voltage Out |
12V DC |
Power |
36 W |
Maximum Discharge |
3A continuous, 5A peak |
Working Temperature |
-20 ℃ ~ +65 ℃ |
Conversion Efficiency |
93% |
Power Consumption |
20 mA |
Ripple |
40 mV |
Wiring (Input) |
1 x 20 cm with M8 tongue connector |
Wiring (Output) |
1 x 40 cm with ANEN PA-45 connector |
Material |
Aluminum |
Dimensions |
74 x 74 x 32 mm |
Weight |
300 g |
Protection features
Short circuit protection |
Yes |
High temperature protection chip |
Yes |
Output overcurrent protection |
Yes |
Output short-circuit protection |
Yes |
Input overvoltage protection |
Yes |
Built-in fuse |
Yes (3A) |
Input reverse polarity protection |
No |
Output reverse polarity protection |
Yes |
Certification and warranty
Security class (IEC 529) |
IP65 |
CE certificate |
Yes |
Warranty |
2 years |
Product code |
OM121236WAL |
Barcode |
7106623688021 |
EAN |
8720964630113 |
HS code (International / EU) |
850440 / 85044085 |
Reviews
There are no reviews yet.